Edge-Intelligent Industrial IoT for Occupational-Safety Monitoring and Automated Compliance Reporting
Keywords:
Industrial Internet of Things, occupational safety, edge computing, gas sensing, MQTT, time-weighted average, compliance reportingAbstract
Occupational hazards such as toxic and combustible gases, airborne dust, excessive noise and unsafe thermal conditions continue to cause a large share of industrial injuries and long-term occupational disease, yet the dominant safety practice in most facilities remains discrete and manual. This survey reviews the body of work that moves occupational-safety monitoring from periodic human inspection toward continuous, networked, and increasingly autonomous sensing. We organise the literature around a four-stage evolution—manual practice, sensor-based standalone detectors, cloud-centric Internetof-Things (IoT) platforms, and edge-first architectures—and examine the enabling components at each stage: low-cost gas and environmental sensing, microcontroller platforms, lightweight publish/subscribe communication, and on-node intelligence. Particular attention is given to two capabilities that distinguish recent edge-intelligent designs from earlier threshold detectors: the computation of cumulative-dose metrics such as the TimeWeighted Average (TWA), and the generation of tamper-evident,auditor-ready compliance records. We compare the paradigms along the axes of latency, availability, scalability and evidentiary value, summarise representative sensing channels and their statutory limits, and identify open challenges in sensor calibration,energy autonomy, security and standardised reporting. The
survey is intended as a structured entry point for researchers and practitioners designing plant-scale occupational-safety systems from accessible, low-cost hardware.
References
J. Gubbi, R. Buyya, S. Marusic, and M. Palaniswami, “Internet of Things
(IoT): A vision, architectural elements, and future directions,” Future
Gener. Comput. Syst., vol. 29, no. 7, pp. 1645–1660, 2013.
A. Al-Fuqaha, M. Guizani, M. Mohammadi, M. Aledhari, and M.
Ayyash, “Internet of Things: A survey on enabling technologies, protocols, and applications,” IEEE Commun. Surveys Tuts., vol. 17, no. 4,
pp. 2347–2376, 2015
A. Zanella, N. Bui, A. Castellani, L. Vangelista, and M. Zorzi, “Internet
of Things for smart cities,” IEEE Internet Things J., vol. 1, no. 1, pp.
22–32, 2014.
W. Shi, J. Cao, Q. Zhang, Y. Li, and L. Xu, “Edge computing: Vision
and challenges,” IEEE Internet Things J., vol. 3, no. 5, pp. 637–646,
2016
M. Satyanarayanan, “The emergence of edge computing,” Computer,
vol. 50, no. 1, pp. 30–39, 2017.
F. Bonomi, R. Milito, J. Zhu, and S. Addepalli, “Fog computing and its
role in the Internet of Things,” in Proc. 1st Ed. MCC Workshop Mobile
Cloud Comput., 2012, pp. 13–16.
M. Chiang and T. Zhang, “Fog and IoT: An overview of research
opportunities,” IEEE Internet Things J., vol. 3, no. 6, pp. 854–864, 2016.
Z. Zhou, X. Chen, E. Li, L. Zeng, K. Luo, and J. Zhang, “Edge
intelligence: Paving the last mile of artificial intelligence with edge
computing,” Proc. IEEE, vol. 107, no. 8, pp. 1738–1762, 2019.
Y. Mao, C. You, J. Zhang, K. Huang, and K. B. Letaief, “A survey
on mobile edge computing: The communication perspective,” IEEE
Commun. Surveys Tuts., vol. 19, no. 4, pp. 2322–2358, 2017.
A. Banks and R. Gupta, “MQTT Version 3.1.1 Plus Errata 01,” OASIS
Standard, 2015.
N. Naik, “Choice of effective messaging protocols for IoT systems:
MQTT, CoAP, AMQP and HTTP,” in Proc. IEEE Int. Syst. Eng. Symp.
(ISSE), 2017, pp. 1–7.
Y. Yi, K. M. Lu, B. Liu, et al., “A survey of wireless sensor network
based air pollution monitoring systems,” Sensors, vol. 15, no. 12, pp.
31392–31427, 2015.
M. Mahbub, “Toxic and hazardous gas detection, measurement and monitoring system for safety assurance in home and industrial application
of wireless sensor node,” Eng. Technol. Res., vol. 1, no. 3, pp. 89–98,
2019.
American Conference of Governmental Industrial Hygienists (ACGIH),
TLVs and BEIs: Threshold Limit Values for Chemical Substances and
Physical Agents. Cincinnati, OH, USA: ACGIH.
Occupational Safety and Health Administration (OSHA), “Permissible
Exposure Limits—Annotated Tables,” U.S. Dept. of Labor
Espressif Systems, ESP32 Series Datasheet, 2023.
P. Warden and D. Situnayake, TinyML: Machine Learning with TensorFlow Lite on Arduino and Ultra-Low-Power Microcontrollers. Sebastopol, CA, USA: O’Reilly Media, 2019
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Nexora: Frontiers of Thought Global Journal of Knowledge Inquiry and Innovation

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Certainly. For your International Journal of Interdisciplinary Research (IJIR), you can add the following as the License Terms / Copyright and Licensing Policy in OJS.
License Terms
License Terms
The International Journal of Interdisciplinary Research (IJIR) publishes its scholarly content under an open-access licensing model. Unless otherwise stated, articles published in the journal are made available under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
Creative Commons Attribution 4.0 International License
Under the CC BY 4.0 license, readers are permitted to:
-
Share — copy and redistribute the published material in any medium or format.
-
Adapt — remix, transform and build upon the material for any purpose, including commercial purposes.
These permissions are granted provided that appropriate credit is given to the original author(s) and the journal.
Attribution Requirements
When using or redistributing material published in the journal, users should:
-
Give appropriate credit to the author(s).
-
Provide the title of the article and the journal name.
-
Provide a reference or link to the original publication where reasonably possible.
-
Provide a link to the applicable Creative Commons license.
-
Clearly indicate if any changes were made to the original material.
-
Not suggest that the original author(s) or the journal endorses the use or adaptation of the material.
Copyright
Copyright remains with the author(s) of the published work unless otherwise specified in an individual publishing agreement.
By submitting a manuscript, authors confirm that they have the necessary rights to submit and publish the work and that publication of the manuscript does not knowingly infringe the rights of any third party.
Authors are responsible for obtaining permission for copyrighted material belonging to others that is included in their manuscripts.
Author Rights
Authors retain the right to:
-
Share and distribute their published work in accordance with the applicable Creative Commons license.
-
Deposit the published article in institutional or subject repositories.
-
Use the published work for teaching, academic and research purposes.
-
Incorporate portions of the work into future scholarly works, subject to appropriate acknowledgement and applicable third-party rights.
-
Present their research at academic conferences and other scholarly events.
Third-Party Material
Some content within an article may be subject to copyright or licensing conditions different from those applying to the article as a whole. Such material should be identified by the author and appropriately credited.
Users wishing to reuse third-party material must obtain permission from the relevant copyright holder where required.
Disclaimer
The opinions, findings, conclusions and recommendations expressed in published articles are those of the respective authors and do not necessarily represent the views of the International Journal of Interdisciplinary Research, its editors or publisher.
The journal does not assume responsibility for claims, errors or omissions contained in individual articles. Authors remain responsible for the accuracy and originality of their submitted work.
License Statement
All articles published by the International Journal of Interdisciplinary Research are licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), unless otherwise stated.
Readers may copy, distribute, display, adapt and build upon published material provided that appropriate credit is given to the original author(s), the article and the journal, and a link to the license is provided.
License: Creative Commons Attribution 4.0 International (CC BY 4.0)
This is suitable for the OJS “License Terms” field and is broad enough for a multidisciplinary journal.